How to Replace a Kia Sportage Replacement Key
The key of many Kia models comes with an entry system that is keyless in. This key is similar to the remote control and can be exchanged by an Kia dealer.
Key fobs might stop working due to various reasons, such as a dead coin battery, worn buttons or buttons, water damage, signal interference and a damaged receiver module. Here are some tips to help you get your Kia sportage replacement key working again.
How do you replace the remote key or smart key?
If your Kia is equipped with an intelligent key, remote key push to start key or a regular non-transponder metal key, the battery in these keys will eventually need replacement. This is especially when the vehicle displays a message that indicates that the remote or smart key is not powered by the battery.
This is a relatively simple process. To replace the keyfob battery take out your mechanical key from the slit that is located at the back of the fob. Then, pull the cover off. A small screw will be in the key fob to hold the battery in its place. Utilizing a small screwdriver take the screw off and remove the battery that was in place. Install g28carkeys.co.uk and close the slit on the key fob.
Once the key fob has an updated battery Test it by pressing the locks and unlock buttons. If the doors lock and unlock as expected, then you're all set! You can now utilize the hands-free feature to lock and unlock your Kia whenever your fingers become chilly or when you need to run errands around Brandon.
Note: Certain key fobs could need to be programmed (transponder chips or smart keys). This requires a particular programming machine that only the dealer or locksmith has access to. Other keys (non-transponder metal keys) do not require programming. If your key requires to be reprogrammed, you will need to be aware of the key code stamped on the key code tag and keep it in a safe location.
How do you replace the battery?
If the Kia key fob doesn't respond to pressing the lock/unlock button, it's a sign that the battery is depleted. A weak battery could cause other issues, like the check engine light appearing or the engine not cranking correctly. It is fairly easy to replace the key fob batteries with only a few simple tools.
Make sure you turn off your vehicle and shut all doors before you begin. Find the small metal or plastic piece that is on the bottom of your key fob and move it until a metal key pops out. The key can be put into the door's driver handle to unlock your car.
To replace the battery inside the key fob remove the cover at the rear. Make use of a plastic pry tool to loosen the latch that holds the black negative cable. Remove the old battery, and then align the new battery in a way that the "+" positive side is facing you, while the "-" negative side is facing the fob's metal electrical contacts. Push the new CR2032 battery straight into place, avoiding excessive force to avoid bending or damaging the contacts on the metal.
After you have installed the new battery then turn the key fob off and on in the ignition until the door locks cycle. You can then test the Kia's Key fob again to confirm that it's functioning properly.
How do I replace a smart keys
There is a possibility of having a standard keyfob, or a Smart Key, based on the model of Kia Sportage. The smart key features an embedded mechanical key blade, while the standard keyfob does not. Both key fobs are equipped with batteries that will eventually require changing. It's an easy task that only takes about two minutes.
Be sure to turn off your Kia and stand on a flat, well-lit surface before you begin. Be aware that the fob can contain small parts that can fall should you not be careful.
The small release button is located on the lower backside. It's either a circular button or a rectangular slot. After pressing this button the mechanical key blade will pop out and you can then open the key fob.
Once you have the key fob opened, you can simply remove the old battery, and replace it. The new battery is a CR-2032, and can be purchased online or in your local auto parts store. When you're done, the key fob should permit you to lock, unlock, and start your vehicle, even if it isn't running.
How do you replace the mechanical key?

The Kia key fob is a fantastic convenience that lets us lock and unlock our car at the push of a button. However, like all devices there are issues with it occasionally. There are ways to solve these issues and keep your key fobs working for the duration of.
One of the most frequent issues is a low or dead battery. This can cause your device to stop working or work intermittently. If this is the case try replacing the battery with a new one.
If this does not resolve the issue, use the flathead screwdriver that is standard to wedge the plastic casing of the fob open. Be careful not to damage any internal components or scratch the plastic. After the battery has been removed, replace it with a brand new battery.
Close and open the door with the mechanical key. (Every Kia fob comes with an emergency mechanical key which will fit into the slot). Test the key fob to confirm it's working as intended. If the key fob not working, contact a locksmith or dealer to resolve the issue. To avoid lockouts in the future, ensure you purchase an emergency key that will work on all door and trunk cylinders.